Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Case Drain | None |
| Pressure [Max] | 1650 psi |
| Port Type | NPTF |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 1.75 in |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Flow Rate | 57 lpm |
| Paint Code | D |
| Splines | 0 |
| Shaft Size & Type | Straight |
| Mounting Type Code | B |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Port Code | B |
| Series | H Series |
| Case Drain Code | 0 |
| Corrosion Resistant | Yes |
| Mount Type | 4 Bolt |
| Port Size | 1/2 |
| Special Features Assembly Code | 0 |
| Mounting Hole Size | 3/8 in |
| Mounting Holes | 3/8-16 |
| Output Torque at Rated PSI (inch/pounds) | 2059 in lb |
| RPM [Max] | 353 rpm |
| Port Location | Side Port |
| Displacement (in³/rev) | 9.7 |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Duty | Corrosion Resistant-Duty |
| Special Features | None |
| Motor Type | Spool Valve |
| Paint/Packaging | Environmental Coated Gloss White |
| Material | Cast Iron |
| Port Size & Location | 1/2 in NPTF Side |
| Output Shaft Code | 27 |
| Flange Orientation | Standard |
| Special Features Hardware Code | 00 |
| Rotation | Standard Rotation |
| Bolt Circle Dia. | 3 1/4 in |
| RPM [Min] | 353 rpm |
| Seal Material | Buna-N |
| Weight | 12.5 LB |
