Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Size & Type | Straight |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Mount Type | 2 Bolt |
| Case Drain Code | 0 |
| Pilot Diameter | 3.25 in |
| Special Features | None |
| Displacement (in³/rev) | 2.81 |
| Mounting Type Code | A |
| Port Size | 1/2 |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.565 in |
| Flow Rate | 45 lpm |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | 00 |
| Splines | 0 |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Flow [Max] | 12 gal/min |
| Port Location | Side Port |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Port Code | B |
| Port Type | NPTF |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Bolt Circle Dia. | 4.187 in |
| Pressure [Max] | 1800 psi |
| Paint Code | A |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Series | H Series |
| Shaft Type | Straight |
| RPM [Max] | 969 rpm |
| Case Drain | None |
| Output Shaft Code | 24 |
| Flange Orientation | Standard |
| Mounting Holes | 0.535 in |
| RPM [Min] | 969 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Weight | 13.0 LB |
