Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 18.2 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Bolt Circle Dia. | 3 1/4 in |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Series | S Series |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 18.2 |
| Case Drain | None |
| Special Features Hardware Code | 00 |
| Splines | 6 |
| Mounting Hole Size | 3/8 in |
| Mount Type | 4 Bolt |
| Port Code | B |
| Maximum Speed @ Continuous Flow | 190 rpm @ 15 gal/min |
| RPM [Min] | 299 rpm |
| Motor Type | Spool Valve |
| Flow Rate | 15 gal/min |
| Shaft Type | Splined |
| Output Torque at Rated PSI (inch/pounds) | 4345 in lb |
| Seal Material | Buna-N |
| Port Type | NPTF |
| Port Size | 1/2, 1/2-14 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Paint Code | A |
| Material | Cast Iron |
| Pressure [Max] | 1500 psi |
| Shaft Size & Type | 1 in - 6T Spline |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 190 rpm |
| Pilot Diameter | 1.75 in |
| Output Shaft Code | 02 |
| Mounting Type Code | REF! |
| Special Features | None |
| Case Drain Code | 0 |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Weight | 29.0 LB |
