Find a Service Center
- Spool Motor
- Geroler
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 3.54 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Similar in design to the geroter motor, but feature better low speed performance characteristics and higher overall efficiency
- Generates up to 15 hp
- Shaft size: 1"
- Shaft Type: Straight with woodruff key
- Motor Element: Geroler
- Motor Type: Spool valve
| Maximum Speed @ Continuous Flow | 963 rpm @ 15 gal/min |
| Mount Type | 2 Bolt |
| Special Features | None |
| Rotation | Standard Rotation |
| Splines | 6 |
| Pressure [Max] | 2000 psi |
| RPM [Max] | 963 rpm |
| Motor Element | Geroler |
| Bolt Circle Dia. | 4.187 in |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Output Shaft Code | 02 |
| Output Torque at Rated PSI (inch/pounds) | 1021 in lb |
| Port Location | Side Port |
| RPM [Min] | 963 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Type | Splined |
| Shaft Size & Type | 1 in - 6T Spline |
| Special Features Hardware Code | 00 |
| Mounting Hole Size | 0.565 in |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | REF! |
| Pilot Diameter | 3.25 in |
| Case Drain | None |
| Series | S Series |
| Flow Rate | 14 gal/min |
| Duty | Standard-Duty |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Flange Orientation | Standard |
| Displacement (in³/rev) | 3.54 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Holes | 0.535 in |
| Corrosion Resistant | No |
| Port Type | Manifold |
| Paint Code | A |
| Port Code | C |
| Weight | 29.0 LB |
