Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.6 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Special Features Hardware Code | 00 |
| Flow [Max] | 15 gal/min |
| Case Drain Code | 1 |
| RPM [Min] | 792 rpm |
| Paint Code | A |
| Port Size | SAE-10, 7/8-14 UNF |
| Motor Type | Spool Valve |
| Flow Rate | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Maximum Speed @ Continuous Flow | 792 rpm @ 15 gal/min |
| Output Shaft Code | 01 |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 4.6 |
| Series | S Series |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features | None |
| Special Features Assembly Code | 0 |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| Duty | Standard-Duty |
| Port Type | SAE O-Ring |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Port Size & Location | SAE-10 Side |
| Pressure [Max] | 2000 psi |
| Corrosion Resistant | No |
| Output Torque at Rated PSI (inch/pounds) | 1325 in lb |
| Port Code | A |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Type Code | REF! |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Bolt Circle Dia. | 4.19 in |
| RPM [Max] | 792 rpm |
| Mounting Hole Size | 0.535 in |
| Splines | 0 |
| Material | Cast Iron |
| Weight | 29.0 LB |
