Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 10.07 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Special Features | None |
| Mounting Type Code | REF! |
| Case Drain Code | 1 |
| Shaft Type | Straight w/ Woodruff Key |
| RPM [Max] | 165 rpm, 343 rpm |
| Mount Type | 2 Bolt |
| Port Size | SAE-10, 7/8-14 UNF |
| Material | Cast Iron |
| Rotation | Standard Rotation |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 15 gal/min |
| Pressure [Max] | 1900 psi |
| Motor Element | Gerotor |
| Port Code | A |
| Special Features Hardware Code | 00 |
| Series | S Series |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Mounting Hole Size | 0.535 in |
| Port Location | Side Port |
| Displacement (in³/rev) | 10.07 |
| Paint Code | A |
| Mounting Holes | 0.535 in |
| Port Type | SAE O-Ring |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Port Size & Location | SAE-10 Side |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 2664.07 in lb |
| Seal Material | Buna-N |
| Output Shaft Code | 01 |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Flange Orientation | Standard |
| Weight | 29.0 LB |
