Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 18.7 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Extended bearing life
- Increased shaft seal
- Compact yet powerful
| Shaft Size & Type | 1 in Straight |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Series | T Series |
| RPM [Min] | 183 rpm |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Output Shaft Code | 01 |
| Bolt Circle Dia. | 4.19 in |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Material | Ductile Iron |
| Port Location | Side Port |
| RPM [Max] | 183 rpm |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 18.7 |
| Motor Type | Spool Valve |
| Corrosion Resistant | No |
| Output Torque at Rated PSI (inch/pounds) | 3903.18 in lb |
| Maximum Speed @ Continuous Flow | 183 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Splines | 0 |
| Port Type | SAE O-Ring |
| Paint Code | A |
| Case Drain Code | 1 |
| Inlet Pressure [Max] | 2500 psi |
| Port Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features | None |
| Flow Rate | 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Flange Orientation | Standard |
| Mount Type | 2 Bolt |
| Port Size | SAE-10, 7/8-14 UNF |
| Special Features Hardware Code | 00 |
| Weight | 15.0 LB |
