Find a Service Center
- 1/5" Pitch
- XL Belt Size
- 3/8" or 1/4" Belt Width
- 18 Teeth
- 1.146" Pitch Diameter
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Nonslip
- No lubrication required
- Constant speed
- Minimum backlash
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Bore Type | Reborable |
| Type | DF-1 |
| Bore Range [Max] | 0.5 in |
| Hub Projection | 1/4 in |
| Hub Dia. | 0.81 in |
| No. of Teeth | 18 |
| Bore Range [Min] | 0.25 in |
| Bushing Series | N/A |
| Length Through Bore | 0.78 in |
| Belt Size | XL |
| Belt Width | 0.375 in, 0.25 in |
| Belt Pitch | 0.2 in |
| Finished Bore | N/A |
| Pitch Diameter | 1.146 in |
| Bushing Type | None |
| Weight | 0.2 LB |
| EAN or UPC | 782475087761 |
