Find a Service Center
Dodge
P2B-DLEZ-50M-SHCR
E-Z KLEEN DLEZ Normal-Duty Stainless Steel Housed Pillow Block
Item #101861113
- 2-Bolt Thru-Bolt Pillow Block
- 50 mm Shaft
- 6.227" Bolt Centers
- 2 1/4" Centerline to Base
- Stainless Steel Housing
| Bolt Holes | 2 |
| Base Width | 1 5/8 in |
| Housing Construction | 1 Piece |
| Mounted Unit Duty | Corrosion Resistant-Duty |
| Bolt Hole Spacing Range [Max] | 6 11/16 in |
| Insert Type | Corrosion-Resistant Insert |
| Seal Type | PROGUARD™ Plus Contact Seals w/Flingers |
| Bearing Design | Non-Expansion |
| Center of Bearing to Front of Inner Ring | 1 11/32 in |
| Collar O.D. | 3 15/64 in |
| Shaft Dia. | 50 mm |
| Bearing Type | Ball Bearing |
| Bolt Hole Spacing | 6.227 in |
| Lubrication | Relubricatable |
| Center of Bearing to Back of Inner Ring | 3/4 in |
| Housing Material | Stainless Steel |
| Base Height | 5/8 in |
| Length Through Bore | 2.09375 in |
| Base Length | 8 in |
| End Type | Open End |
| Locking Device | Concentric Clamp Collar |
| Housing Height | 4 5/16 in |
| Pillow Block Type | Thru-Bolt |
| Outer Ring Size | 210 |
| Misalignment Range | ±2° |
| Bolt Size | M16 |
| Bolt Hole Spacing Range [Min] | 5 49/64 in |
| Inch/Metric | Metric |
| Weight | 5.77 LB |
| EAN or UPC | 782475584185 |
