Find a Service Center
- 70 mm Shaft
- 76.2 mm Base to Center
- 190.5 mm - 215.9 mm Bolt Spacing
- Contact Seals w/Flingers
- Cast Iron Housing
| Base Width | 68.3 mm |
| Center of Bearing to Front of Inner Ring | 38.5 mm |
| Inch/Metric | Metric |
| Collar O.D. | 96.8 mm |
| Bolt Hole Length | 33.3 mm |
| Shaft Dia. | 70 mm |
| Base Length | 273.1 mm |
| Bolt Holes | 2 |
| Outer Ring Size | 214 |
| Bearing Type | Ball Bearing |
| Housing No. | P2B-GT-14 |
| Housing Height | 154.4 mm |
| Base Height | 23.8 mm |
| Locking Device | GRIP TIGHT™ Adapter |
| Bearing Design | Non-Expansion |
| Bolt Size | M18 |
| Seal Type | Contact Seals w/Flingers |
| Mounted Unit Duty | Normal-Duty |
| End Type | Open End |
| Housing Material | Cast Iron |
| Bolt Hole Spacing Range [Min] | 190.5000 mm |
| Bolt Hole Spacing Range [Max] | 215.9000 mm |
| Length Through Bore | 60.7 mm |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing | 203.2 mm |
| Series | Grip Tight™ |
| Lubrication | Relubricatable |
| Adapter Assembly | AN-GT-14-70M |
| Housing Construction | 1 Piece |
| Weight | 12.71 LB |
| EAN or UPC | 782475879502 |
