Find a Service Center
- 2-Bolt Thru-Bolt Pillow Block
- 1 1/4" Shaft
- 4 3/4" Bolt Centers
- 1 11/16" Centerline to Base
- Polymer Housing
| Locking Device | GRIP TIGHT™ Adapter |
| Bearing Design | Non-Expansion |
| Length Through Bore | 1.60938 in |
| Base Length | 6 5/16 in |
| End Type | Open End |
| Seal Type | PROGUARD™ Plus Contact Seals w/Flingers |
| Housing Height | 3 11/32 in |
| Center of Bearing to Front of Inner Ring | 1 5/64 in |
| Bolt Hole Spacing | 4 3/4 in |
| Inch/Metric | Inch |
| Insert Type | Corrosion-Resistant Insert |
| Bolt Hole Spacing Range [Max] | 4 57/64 in |
| Bolt Hole Spacing Range [Min] | 4.60938 |
| Shaft Dia. | 1.25 in |
| Collar O.D. | 2 in |
| Bolt Holes | 2 |
| Base Height | 45/64 in |
| Bolt Size | 1/2 in |
| Housing Construction | 1 Piece |
| Misalignment Range | ±2° |
| Bearing Type | Ball Bearing |
| Housing Material | Polymer |
| Center of Bearing to Back of Inner Ring | 17/32 in |
| Mounted Unit Duty | Corrosion Resistant-Duty |
| Pillow Block Type | Thru-Bolt |
| Base Width | 1 25/32 in |
| Lubrication | Relubricatable |
| Outer Ring Size | 206 |
| Weight | 2.6 LB |
| EAN or UPC | 782475997121 |
