Find a Service Center
- 3 7/16" Shaft
- 3 3/4" Base to Center
- Springlok™ Collar
- 9 3/8" to 10 5/8" Bolt Spacing
- Heavy-Duty
features
- Springlok™ 65° setscrew mounting
- Factory lubed, sealed and adjusted
- Elongated bolt holes
- Triple lip Nitrile rubber seal
- Larger rollers
- Case-carburized inner rings resist cracking
- ABB Ability Smart Sensor ready
| Base Length | 13 in |
| Total Float | 1/4 in |
| Bolt Hole Spacing | 10 in |
| End Type | Open End |
| Pillow Block Type | Thru-Bolt |
| Seal Type | TRIDENT™ Triple Lip Rubbing Seals |
| RPM [Max] | 1,280 rpm |
| Housing Construction | 1 Piece |
| Base Height | 2 1/4 in |
| Bolt Hole Length | 1 1/2 in |
| Center of Bearing to Front of Inner Ring | 2 37/64 in |
| Misalignment Range | ±1° |
| Bolt Hole Spacing - Width | 2 in |
| Inch/Metric | Inch |
| Bolt Holes | 4 |
| Shaft Dia. | 3 7/16 in |
| Collar O.D. | 5 1/2 in |
| Housing Height | 7 9/16 in |
| Bolt Size | 3/4 in |
| Lubrication | Relubricatable |
| Insert Type | Steel Insert |
| Center of Bearing to Back of Inner Ring | 1 7/16 in |
| Bolt Hole Spacing Range [Min] | 9 3/8 in |
| Base Width | 4 1/8 in |
| Series | S-2000 |
| Bearing Type | Spherical Roller Bearing |
| Dynamic Load Rating | 65,500.00 lbf |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Insert | 22218 |
| Static Load Rating [Max] | 81,500.00 lbf |
| Bearing Design | Expansion |
| Housing Material | Cast Iron |
| Length Through Bore | 4 1/64 in |
| Bolt Hole Spacing Range [Max] | 10 5/8 in |
| Locking Device | Springlok™ Collar |
| Weight | 35.5 LB |
| EAN or UPC | 782475306213 |
