Find a Service Center
- 9.25 in Bore Size
- 1.97 in Stroke
features
- Lock nut provides positive and safe mechanical load holding
- Low friction locking rings spin easy, save time and effort
- Designed to withstand 10% side-load up to 90% of maximum stroke
- Hardened surface resists side-loading and cyclic wear
- Overflow port as stroke limiter to prevent plunger blow-out
- Weather protected, inside and out
- Replaceable bearings enclose the plunger for support throughout the stroke
- Certified lifting eyes and base mounting holes
| Base Mounting Holes Thread Depth | 25 mm |
| Plunger Type | Solid |
| Action | Single-Acting |
| Optional Tilt Saddle Diameter | 6.89 in |
| Series | HCL |
| Locknut Height | 56 mm |
| Saddle Protrusion From Plunger | 0.08 in, 2 mm |
| Optional Tilt Saddle Addition To Collapsed Height | 1.54 in, 39 mm |
| Body Material | Steel |
| Base Mounting Holes Thread | M16 x 2 |
| Side Load Resistance Of Maximum Capacity | 10% |
| Surface Treatment | Nitride |
| Operating Pressure Ranges [MAX] | 10000 psi |
| Collapsed Height With Optional Tilt Saddle | 12.48 in, 317 mm |
| Base To Advance Port | 2.28 in, 58 mm |
| Operating Pressure [Max] | 700 bar, 10000 psi |
| Bore Size | 9.25 in, 235 mm |
| Cylinder Capacity Advance [MAX] | 341 Tons, 3036 kN |
| Stroke Range | 1.0 to 1.99 in, 48 to 94 mm |
| Cylinder Class | 300 Tons |
| Saddle Maximum Tilt Angle Radius | 5 degrees |
| Base Mounting Holes Bolt Circle | 260 mm |
| Weight | 0.0 LB |
