Find a Service Center
- Single-Acting Aluminum Cylinder
- 5.910 in Stroke
- 5.3100 in Bore
- 12.64 in Collapsed Height
- 18.54 in Extended Height
features
- High-strength return spring for rapid cylinder retraction
- Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
- Hard coat finish on all surfaces extends cylinder life
- Steel base plate and saddle protect against load-induced damage
includes
- CR-400 Coupler, Dust Cap
| Oil Capacity | 131.04 in3 |
| Type | Spring Return |
| Activating Fluid | Oil |
| Capacity Wt. [Nom] | 100 tons |
| Collapsed Height | 12.64 in, 321 mm |
| Cylinder Effective Area - Advance | 22.19 in2, 143.1 cm2 |
| Operating Pressure [Max] | 10000 psi, 700 bar |
| Plunger Diameter | 4.33 in |
| Oil Capacity - Advance | 131.14 in3, 2147 cm3 |
| Cylinder Effective Area | 22.19 in2 |
| Series | RAC |
| Optional Tilt Saddle Addition To Collapsed Height | 0.75 in, 19 mm |
| Extended Height | 18.55 in, 471 mm |
| Cylinder Class | 100 Ton |
| Return Type | Single-Acting, Spring Return |
| Base Mounting Holes Thread Depth | 12 mm |
| Saddle Diameter | 3.7 in, 97 mm |
| Coupler Used | CR400 Coupler |
| Collapsed Height [Min] | 10 in, 255 mm |
| Saddle Protrusion From Plunger | 0.12 in, 31 mm |
| Saddle Tilt Angle [Max] | 5 degrees |
| Cylinder Bore Diameter | 5.32 in, 135 mm |
| Plunger Type | Solid |
| Cylinder Capacity Advance [MAX] | 1002 kN |
| O.D. | 7.09 in, 180 mm |
| Surface Treatment | Anodized |
| Collapsed Height [Max] | 14.99 in, 381 mm |
| Stroke | 5.91 in, 150 mm |
| Optional Tilt Saddle Diameter | 3.82 in |
| Material | Aluminum |
| Base Mounting Holes Thread | M10 |
| Base Mounting Holes Bolt Circle | 5.91 in, 150 mm |
| Base To Advance Port | 1.82 in, 46 mm |
| Weight | 59.0 LB |
| EAN or UPC | 662005125807 |
