Find a Service Center
- 50 ton Capacity
- 5.91" Stroke
- Double Acting Aluminum Cylinder
features
- Double-acting for rapid retraction, regardless of hose lengths and system losses
- Composite bearings prevent metal-to-metal contact, increasing cylinder life and resistance to side loads of up to 10%
- Hard coat finish on all surfaces resists damage and extends cylinder life
- Handles standard on 50, 100, and 150 ton models
- Steel base plate and saddle for protection against load-induced damage
- Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
- Built-in safety valve prevents accidental over-pressurization
- CR-400 coupler and dust cap standard
- All RAR cylinders are equipped with bolt-on, removable, hardened steel saddles
compliances
- All cylinders meet ASME B-30.1 and ISO 10100 standards
caution
- The mounting holes in these aluminum cylinders are designed for fixturing the steel base plate
- they will not withstand the capacity of the cylinder
| Maximum Operating Pressure | 10000 psi |
| Cylinder Capacity - Pull | 21 tons |
| Oil Capacity - Pull | 24.44 in3 |
| Cylinder Effective Area - Push | 10.99 in2 |
| Operating Pressure [Max] | 10000 psi, 700 bar |
| Cylinder Capacity | 50 tons |
| Oil Capacity - Advance | 64.95 in3, 1063 cm3 |
| Collapsed Height | 11.86 in, 301 mm |
| Oil Capacity - Retract | 20.92 in3, 401 cm3 |
| Cylinder Capacity - Push | 55 tons |
| Series | RAR |
| Retracted Height | 11.85 in |
| Single/Double-Acting | Double Acting |
| Cylinder Effective Area - Advance | 10.99 in2, 70.9 cm2 |
| Plunger Diameter | 2.95 in, 75 mm |
| Cylinder Effective Area - Pull | 4.14 in2 |
| Cylinder Effective Area - Retract | 3.54 in2, 26.7 cm2 |
| Oil Capacity - Push | 64.88 in3 |
| Outside Dia. | 5.71 in |
| Cylinder Bore Diameter | 3.74 in, 95 mm |
| Optional Tilt Saddle Addition To Collapsed Height | 0.55 in, 14 mm |
| Top To Retract Port | 2.21 in, 56 mm |
| Base Mounting Holes Thread Depth | 12 mm |
| Collapsed Height [Min] | 10 in, 255 mm |
| Standard | All cylinders meet ASME B-30.1 and ISO 10100 standards |
| Material | Aluminum |
| Return Type | Double-Acting, Hydraulic Return |
| Surface Treatment | Anodized |
| Cylinder Capacity Advance [MAX] | 496 kN |
| Extended Height | 17.76 in, 451 mm |
| Base Mounting Holes Thread | M6 |
| Saddle Diameter | 1.97 in, 71 mm |
| Plunger Type | Solid |
| Saddle Protrusion From Plunger | 0.12 in, 24 mm |
| Base To Advance Port | 1.19 in, 30 mm |
| Cylinder Class | 50 Ton |
| O.D. | 5.71 in, 145 mm |
| Optional Tilt Saddle Diameter | 2.8 in |
| Base Mounting Holes Bolt Circle | 110 mm |
| Stroke | 5.91 in, 150 mm |
| Collapsed Height [Max] | 14.99 in, 381 mm |
| Saddle Tilt Angle [Max] | 5 degrees |
| Coupler Used | CR400 Coupler |
| Weight | 38.5 LB |
| EAN or UPC | 662005125852 |
