Find a Service Center
- 3.9375" Shaft, 5.6875" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Length | 17.313 in |
| Housing Material | Cast Iron |
| Housing Height | 11 1/16 in |
| Shaft Dia. | 3.9375 in |
| Seal Type | Contact Seals |
| Collar No. | SN315K |
| Bolt Hole Spacing | 14 3/4 in |
| Inch/Metric | Inch |
| Bolt Size | 1 in |
| Bolt Hole Width | 1 3/4 in |
| Bolt Holes | 2 |
| Overall Width | 5 1/8 in |
| Pillow Block Type | Thru-Bolt |
| Series | RSAO Series |
| Housing Width | 10 3/4 in |
| Base Height | 2 9/16 in |
| Locking Device | Eccentric Locking Collar |
| Bearing Type | Ball Bearing |
| Length Through Bore | 5.0625 in |
| Insert Type | Steel Insert |
| Bolt Hole Length | 1 1/8 in |
| Bearing Insert | GN315KRRB |
| Lubrication | Relubricatable |
| Collar O.D. | 5 3/4 in |
| Mounted Unit Duty | Heavy-Duty |
| End Type | Open End |
| Bearing Design | Non-Expansion |
| Housing Construction | 1 Piece |
| Base Width | 5 1/8 in |
| Weight | 89.5 LB |
| EAN or UPC | 87796062085 |
