Find a Service Center
- 3.4375" Shaft, 5.125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bearing Insert | GN307KRRB |
| Housing Material | Cast Iron |
| Housing Width | 9 1/2 in |
| Housing Construction | 1 Piece |
| Seal Type | Contact Seals |
| Bolt Hole Width | 2 1/8 in |
| Lubrication | Relubricatable |
| Bolt Hole Length | 1 1/8 in |
| Housing Height | 9 7/8 in |
| End Type | Open End |
| Pillow Block Type | Thru-Bolt |
| Bearing Type | Ball Bearing |
| Mounted Unit Duty | Heavy-Duty |
| Base Width | 4 3/4 in |
| Collar No. | SN307K |
| Locking Device | Eccentric Locking Collar |
| Overall Width | 4 3/4 in |
| Base Length | 16 1/8 in |
| Inch/Metric | Inch |
| Insert Type | Steel Insert |
| Bolt Size | 1 in |
| Bearing Design | Non-Expansion |
| Bolt Hole Spacing | 13 3/8 in |
| Base Height | 2 1/4 in |
| Length Through Bore | 4.5625 in |
| Bolt Holes | 2 |
| Collar O.D. | 5 1/4 in |
| Series | RSAO Series |
| Shaft Dia. | 3.4375 in |
| Weight | 64.822 LB |
| EAN or UPC | 87796062030 |
