Find a Service Center
Alternate Products
AMI Bearings Inc.
UCLP206-20
Wide Inner Ring Cast Iron Housing Material Pillow Block
Item #101759280
AMI Bearings Inc.
KHLP206-20
Narrow Inner Ring Cast Iron Housing Material Pillow Block
Item #101498666
Dodge
P2BVSCB104S
VSCB Series Intermediate-Duty Low Backing Height Cast Iron Pillow Block
Item #101874341
- 1.25" Shaft, 1.5625" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Height | 17/32 in |
| Housing Construction | 1 Piece |
| Inch/Metric | Inch |
| Seal Type | Contact Seals |
| Bearing Design | Non-Expansion |
| Housing Material | Cast Iron |
| Bearing Insert | GY1103KRRB3 |
| Locking Device | Setscrew Locking Collar |
| Bolt Hole Spacing Range [Max] | 5 9/16 in |
| Pillow Block Type | Thru-Bolt |
| Housing Height | 3 5/32 in |
| Bolt Size | 1/2 in |
| Overall Width | 1 21/32 in |
| Length Through Bore | 1.5 in |
| Bearing Type | Ball Bearing |
| Bolt Hole Spacing | 4 5/8 in |
| Collar O.D. | 1.587 in |
| Bolt Holes | 2 |
| Bolt Hole Spacing Range [Min] | 3 11/16 in |
| Insert Type | Steel Insert |
| Lubrication | Relubricatable |
| Series | YAK Series |
| Base Length | 6 3/16 in |
| Mounted Unit Duty | Normal-Duty |
| Shaft Dia. | 1.25 in |
| Base Width | 1 9/16 in |
| End Type | Open End |
| Weight | 2.326 LB |
| EAN or UPC | 87796157507 |
