Find a Service Center
Alternate Products
- 2.6875" Shaft, 3" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Pillow Block Type | Thru-Bolt |
| End Type | Open End |
| Bearing Type | Ball Bearing |
| Overall Width | 3 1/8 in |
| Bolt Hole Spacing | 8 in |
| Lubrication | Relubricatable |
| Mounted Unit Duty | Normal-Duty |
| Base Width | 2 7/8 in |
| Housing Height | 6 1/16 in |
| Bearing Design | Non-Expansion |
| Series | YAK Series |
| Bolt Hole Spacing Range [Max] | 9 3/8 in |
| Bolt Size | 3/4 in |
| Bolt Holes | 2 |
| Bearing Insert | GY1211KRRB |
| Locking Device | Setscrew Locking Collar |
| Housing Material | Cast Iron |
| Inch/Metric | Inch |
| Length Through Bore | 2.75 in |
| Shaft Dia. | 2.6875 in |
| Bolt Hole Spacing Range [Min] | 6 5/8 in |
| Housing Construction | 1 Piece |
| Base Length | 10 1/2 in |
| Seal Type | Contact Seals |
| Base Height | 1 5/16 in |
| Insert Type | Steel Insert |
| Collar O.D. | 3.422 in |
| Weight | 16.18 LB |
| EAN or UPC | 87796157620 |
