Find a Service Center
Alternate Products
- 20 mm Shaft, 31.75 mm Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Series | YAK Series |
| Bearing Insert | GYE20KRRB |
| Bolt Hole Spacing | 96 mm |
| Locking Device | Setscrew Locking Collar |
| Housing Height | 62.7 mm |
| Length Through Bore | 30.9 mm |
| Bolt Hole Spacing Range [Max] | 155.8000 mm |
| Housing Construction | 1 Piece |
| Lubrication | Relubricatable |
| Base Length | 127 mm |
| Bolt Hole Spacing Range [Min] | 76.2000 mm |
| Insert Type | Steel Insert |
| Pillow Block Type | Thru-Bolt |
| Bearing Type | Ball Bearing |
| Overall Width | 34.13 mm |
| Bolt Size | M10 |
| Inch/Metric | Metric |
| Base Width | 31.8 mm |
| Bolt Holes | 2 |
| Mounted Unit Duty | Normal-Duty |
| Base Height | 11.9 mm |
| Bearing Design | Non-Expansion |
| Seal Type | Contact Seals |
| Collar O.D. | 27.56 mm |
| Shaft Dia. | 20 mm |
| End Type | Open End |
| Housing Material | Cast Iron |
| Weight | 1.494 LB |
| EAN or UPC | 87796169623 |
