Skip to content Skip to navigation menu
PB220HW Series HUB-ALLOY® Pillow Block

PB220HX1 3/16

PB220HW Series HUB-ALLOY® Pillow Block
Item #102249167
  • 1 3/16" Shaft
  • 1 9/16" Base to Center
  • 4 11/16" Bolt Hole Spacing
  • HUB-ALLOY® Housing
  • Eccentric Locking Collar
  • Contact Seals
  • Regreasable
+ Show More + Show Less
PB220HW Series HUB-ALLOY® Pillow Block
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1 3/16" Shaft
  • 1 9/16" Base to Center
  • 4 11/16" Bolt Hole Spacing
  • HUB-ALLOY® Housing
  • Eccentric Locking Collar

features

  • Knurled cup point setscrews at 120° to minimize inner ring distortion
  • Recessed housing base to accommodate uneven mounting surfaces
  • Spherical outer race to allow up to 1.5° misalignment
  • All bearings have single lip Nitrile rubber seals with steel trash guard
  • Steel fingers are standard on wide inner race bearings only
  • Races and balls are 52100 steel, hardened, ground, and honed for quiet operation
  • Rugged cast iron or Hub-Alloy® housing
  • Zone-hardened inner race
  • Prelubricated with high quality lithium grease. 1/4-28 Zerk fitting provided to allow for relube
  • Choice of narrow or wide inner race, setscrew locking or eccentric collar locking, normal-duty, or medium-duty bearings
  • Slotted bolt holes
  • Grade 10 balls
  • Molded glass fiber reinforced polyamide retainer
Overall Width 2 9/64 in
Seal Type Contact Seals
Bolt Hole Spacing Range [Min] 4 1/4 in
Housing Construction 1 Piece
Housing Width 1 1/2 in
Bolt Holes 2
Temperature Range [Max] 225 °F
Bearing Type Ball Bearing
Bearing Design Non-Expansion
Temperature Range [Min] -25 °F
Bearing Insert YW220X1 3/16
Bolt Size 1/2 in
Misalignment Range ±1 1/2°
Inch/Metric Inch
Insert Type Steel Insert
Housing Material Hub-Alloy®
Pillow Block Type Thru-Bolt
Locking Device Eccentric Locking Collar
Lubrication Relubricatable
Base Height 9/16 in
Base Length 6 1/16 in
Base Width 1 1/2 in
Collar O.D. 1.71 in
Mounted Unit Duty Normal-Duty
Bolt Hole Spacing Range [Max] 5 1/8 in
Shaft Dia. 1.1875 in
End Type Open End
Bolt Hole Spacing 4 11/16 in
Housing Height 3 3/32 in
Weight 2.5 LB
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison