Skip to content Skip to navigation menu
PB250N Series Nickel Plated Pillow Block

PB250NX1 1/2

PB250N Series Nickel Plated Pillow Block
Item #101033010
  • PB250N Series Normal-Duty Pillow Block
  • 1 1/2" Shaft
  • 5 17/32" Bolt Centers
  • 1 15/16" Center Line to Base
  • Setscrew Locking Collar
  • Cast Iron - Nickel Plated
  • Regreasable
  • Contact Seals
+ Show More + Show Less
PB250N Series Nickel Plated Pillow Block
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • PB250N Series Normal-Duty Pillow Block
  • 1 1/2" Shaft
  • 5 17/32" Bolt Centers
  • 1 15/16" Center Line to Base
  • Setscrew Locking Collar

features

  • Molded glass fiber reinforced polyamide retainer
  • Grade 10 balls
  • Races and balls are 52100 steel, hardened, ground, and honed for quiet operation
  • Slotted bolt holes
  • Rugged cast iron or Hub-Alloy® housing
  • Zone-hardened inner race
  • Prelubricated with high quality lithium grease. 1/4-28 Zerk fitting provided to allow for relube
  • Choice of narrow or wide inner race, setscrew locking or eccentric collar locking, normal-duty, or medium-duty bearings
  • Knurled cup point setscrews at 120° to minimize inner ring distortion
  • Recessed housing base to accommodate uneven mounting surfaces
  • Spherical outer race to allow up to 1.5° misalignment
  • All bearings have single lip Nitrile rubber seals with steel trash guard
  • Steel fingers are standard on wide inner race bearings only
Length Through Bore 1.575 in
Bolt Hole Spacing Range [Min] 5 1/8 in
Base Height 3/4 in
Housing Construction 1 Piece
Bolt Holes 2
Misalignment Range ±1 1/2°
Center of Bearing to Front of Inner Ring 1.122 in
Temperature Range [Max] 225 °F
Collar O.D. 2.039 in
Lubrication Relubricatable
Housing Material Cast Iron - Nickel Plated
Pillow Block Type Thru-Bolt
Base Width 1 7/8 in
Housing Width 1 7/8 in
Bolt Hole Spacing 5 17/32 in
Base Length 7 1/8 in
Bolt Size 1/2 in
Bearing Design Non-Expansion
Bearing Insert B250X1 1/2
End Type Open End
Bolt Hole Spacing Range [Max] 5 15/16 in
Housing Height 3 15/16 in
Shaft Dia. 1.5 in
Inch/Metric Inch
Seal Type Contact Seals
Insert Type Steel Insert
Series PB250N
Locking Device Setscrew Locking Collar
Mounted Unit Duty Normal-Duty
Bearing Type Ball Bearing
Overall Width 2 1/16 in
Temperature Range [Min] -25 °F
Weight 5.0 LB
EAN or UPC 662798249469
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison