RC-061008

Single Row Steel Needle Roller Bearing

Item #101711600

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Bearing Design	Roller Clutch
Lubricant	Rust Preventative
Mounting Method	Press Fit
Self Aligning	No
Outer Ring Width	0.5 in, 12.7 mm
Tolerance	Iso Class 0 (RBEC 1)
Precision Class	ABEC 1
Housing Bore [Min]	0.6245 in
I.D.	3/8 in
No. of Rows	1
Precision Ground	Yes
Component	Assembly
Housing Shoulder Diameter	0.88 in
O.D.	0.625 in
Overall Width	0.5 in, 12.7 mm
Relubricatable	No
Cage Type	Window
Radial Internal Clearance	N/A
Series	RC
Bearing Material	1014 Steel
Oil Hole	w/o Oil Hole
Radial Internal Clearance Specification	N/A
Operating Temperature [Max]	230 ˚F
O.D. Type	Straight
Origin	Roller Clutches
Capacity	Standard Capacity
Cage Material	Plastic
Relubrication Feature	No
End Type	Open End
Shaft Dia. [Min]	0.3745 in
Rolling Element	Roller
Clamp Torque	45.4 lbf
Enclosure	Open
Bore Type	Round Bore, Inch Type
Operating Temperature [Min]	-22 ˚F
Shaft Dia. [Max]	0.375 in
Speed (Max) Oil	18000 rpm
Housing Bore [Max]	0.6255 in
Weight	0.003 LB
EAN or UPC	605790201721