Find a Service Center
Alternate Products
- 0.25 in Inner Diameter
- 0.88 in Outer Diameter
- 0.56 in Overall Width
- Double Sealed Enclosure
features
- Lubrication holes and lubrication groove in bore of inner ring provide relubrication when cross-drilled bolt or shaft is used
| Lubricant | Grease |
| Outer Ring Width | 0.5 in, 12.7 mm |
| Precision Class | P0 |
| Operating Temperature [Min] | -22 ˚F |
| Shaft Diameter - Press Fit [Max] | 0.2505 in |
| Working Load | 2000 lbf |
| Roller Type | Straight |
| Roller Dia. | 7/8 in |
| Operating Temperature [Max] | 230 ˚F |
| Shaft Diameter - Slip Fit [Max] | 0.2497 in |
| I.D. | 1/4 in |
| Overall Width | 9/16 in |
| Limiting Speed | 3900 rpm |
| Inside Diameter Tolerance [Min] | 0.2496 in |
| Bore Type | Round |
| Overall Width Tolerance [Min] | 0.5525 in |
| O.D. | 0.88 in, 22.23 mm |
| Inch/Metric | Inch |
| Bearing Type | Needle Bearing |
| Inside Diameter Tolerance [Max] | 0.2502 in |
| Self Aligning | No |
| Enclosure | Sealed |
| Series | YCR |
| Clamping Dia. | 1/2 in |
| Dynamic Capacity | 2250 lbf |
| Roller Width | 1/2 in |
| Overall Width Tolerance [Max] | 0.5675 in |
| O.D. Type | Straight |
| Rolling Element | Needle Roller |
| Speed (Max) Grease | 3900 rpm |
| Component | Assembly |
| Shaft Diameter - Slip Fit [Min] | 0.2493 in |
| Relubrication Feature | No |
| Material | Steel |
| No. of Rows | Single |
| Inner Ring Width | 0.56 in, 14.29 mm |
| Relubricatable | No |
| Shaft Diameter - Press Fit [Min] | 0.2501 in |
| Weight | 0.1 LB |
| EAN or UPC | 605790206214 |
