Find a Service Center
- In-Line
- 10 mm Tube Size
- Straight Fitting Angle
description
- The Legris in-line check valve allows air to pass in one direction while blocking the flow in the other direction. The body of the fitting has an arrow to indicate the direction of flow. A pressure of more than 7 psi will overcome the spring pressure, which keeps the valve closed, thus allowing the passage of air. If the pressure differential is lower than 3.6 psi, the passage is blocked.
features
- Compact and lightweight
- One-piece construction design
- Push-to-connect tube connection is an integral part of the check valve
| Temperature Range [Max] | 150 °F |
| Material | Composite, Nickel-Plated Brass |
| Temperature Range [Min] | 34 °F |
| Inch/Metric | Metric |
| Valve Type | Non-Return |
| Operating Pressure Range | 15 psi to 145 psi |
| Length | 63.500 mm |
| End Type | In-line, Tube x Tube |
| Pressure [Max] | 145 psi |
| Tube Size | 10 mm |
| Direction of Flow | Meter-In, Meter-Out |
| Fitting Angle | Straight |
| Seal Material | Buna-N |
| Weight | 0.039 LB |
| EAN or UPC | 820099340579 |
