Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 16 Number of Teeth
- 1.88 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Length Through Bore | 1 7/8 in |
| Type | PB |
| Outside Dia. | 1.8800 in |
| Bushing Series | N/A |
| Belt Size | L |
| Hub Type | B |
| Set Screw Size | 1/4-20 x 1/4 |
| Bore Range [Max] | 1 1/8 in |
| Bushing Type | None |
| Hub Projection | 5/8 in |
| Hardened Teeth | Without Hardened Teeth |
| Material | Steel |
| Hub Dia. | 1.437 in |
| Belt Width | 1 in |
| Belt Pitch | 3/8 in |
| No. of Screws | 1 |
| Pitch Diameter | 1.910 in |
| Bore Type | Bushed |
| Finished Bore | N/A |
| No. of Teeth | 16 |
| Bore Range [Min] | 1/2 in |
| Weight | 1.0 LB |
| EAN or UPC | 697950101026 |
