Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 18 Number of Teeth
- 2.119 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Projection | 5/8 in |
| Outside Dia. | 2.1190 in |
| Bore Type | Reborable |
| Finished Bore | N/A |
| Belt Pitch | 3/8 in |
| Belt Width | 1/2 in |
| Pitch Diameter | 2.149 in |
| Bore Range [Min] | 1/2 in |
| Hub Dia. | 1.562 in |
| Length Through Bore | 1 3/8 in |
| Belt Size | L |
| Hub Type | B |
| Bushing Series | N/A |
| Material | Steel |
| No. of Teeth | 18 |
| Hardened Teeth | Without Hardened Teeth |
| Type | PB |
| Bore Range [Max] | 1 3/16 in |
| Bushing Type | None |
| Weight | 0.75 LB |
| EAN or UPC | 697950151113 |
