Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 22 Number of Teeth
- 3.447 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hardened Teeth | With Hardened Teeth |
| Belt Pitch | 1/2 in |
| Bore Range [Min] | 3/4 in |
| Belt Width | 1 1/2 in |
| Pitch Diameter | 3.501 in |
| Type | DF-1 |
| Bushing Series | N/A |
| Hub Dia. | 2 7/8 in |
| Length Through Bore | 2.812 in |
| Material | Steel |
| Bushing Type | None |
| Bore Range [Max] | 1 7/8 in |
| Hub Type | B |
| Bore Type | Reborable |
| Finished Bore | N/A |
| Hub Projection | 1 in |
| Belt Size | H |
| No. of Teeth | 22 |
| Outside Dia. | 3.4470 in |
| Weight | 2.0 LB |
| EAN or UPC | 697950151397 |
