Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 26 Number of Teeth
- 3.114 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 26 |
| Bushing Type | None |
| Belt Width | 1 in |
| Pitch Diameter | 3.104 in |
| Hardened Teeth | Without Hardened Teeth |
| Hub Projection | 7/8 in |
| Bore Range [Min] | 0.625 in |
| Hub Type | B |
| Bushing Series | N/A |
| Length Through Bore | 2.125 in |
| Bore Range [Max] | 1.625 in |
| Outside Dia. | 3.114 in |
| Belt Pitch | 0.375 in |
| Material | Steel |
| Type | PB |
| Bore Type | Reborable |
| Belt Size | L100 |
| Finished Bore | N/A |
| Hub Dia. | 2 1/2 in |
| Weight | 3.3 LB |
| EAN or UPC | 697950151748 |
