Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 48 Number of Teeth
- 7.588 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
- Agitators and mixers
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | Quick Disconnect |
| Type | GF-1 |
| Bore Range [Min] | 1/2 in |
| Hub Type | A |
| No. of Teeth | 48 |
| Material | Cast Iron |
| Length Through Bore | 1.313 in |
| Belt Size | H |
| Bore Type | Bushed |
| Belt Width | 1 in |
| Pitch Diameter | 7.639 in |
| Outside Dia. | 7.5880 in |
| Finished Bore | N/A |
| Belt Pitch | 1/2 in |
| Bore Range [Max] | 2 5/8 in |
| Bushing Series | SK |
| Hardened Teeth | With Hardened Teeth |
| Weight | 12.5 LB |
| EAN or UPC | 697950152288 |
