Find a Service Center
- 0.5 in Belt Pitch
- 2 in Belt Width
- 28 Number of Teeth
- 4.402 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 2 in |
| Finished Bore | N/A |
| Bore Type | Bushed |
| Belt Pitch | 0.5 in |
| Length Through Bore | 1.797 in |
| Hub Type | A |
| Outside Dia. | 4.402 in |
| Belt Size | H |
| Bushing Series | 2012 |
| Width Across Teeth | 2.094 in |
| Bushing Type | Taper-Lock |
| Pitch Diameter | 4.456 in |
| Type | KF |
| Belt Width | 2 in |
| No. of Teeth | 28 |
| Bore Range [Min] | 0.5 in |
| Material | Steel |
| Weight | 5.1 LB |
| EAN or UPC | 697950083599 |
