Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 40 Number of Teeth
- 6.312 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | Taper-Lock |
| Bushing Series | 2517 |
| Hub Type | A |
| Width Across Teeth | 1.563 in |
| No. of Teeth | 40 |
| Bore Range [Min] | 0.5 in |
| Pitch Diameter | 6.366 in |
| Finished Bore | N/A |
| Material | Cast Iron |
| Belt Size | H |
| Bore Range [Max] | 2.5 in |
| Bore Type | Bushed |
| Type | KF |
| Belt Width | 1.5 in |
| Belt Pitch | 0.5 in |
| Outside Dia. | 6.312 in |
| Length Through Bore | 1.813 in |
| Weight | 11.44 LB |
| EAN or UPC | 697950083858 |
