Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 48 Number of Teeth
- 7.585 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | H |
| Outside Dia. | 7.585 in |
| Bushing Series | 2517 |
| Bore Range [Min] | 0.5 in |
| Bushing Type | Taper-Lock |
| Bore Range [Max] | 2.5 in |
| Belt Width | 1.5 in |
| Finished Bore | N/A |
| Pitch Diameter | 7.639 in |
| Bore Type | Bushed |
| Length Through Bore | 1.813 in |
| Belt Pitch | 0.5 in |
| Hub Type | A |
| Material | Cast Iron |
| No. of Teeth | 48 |
| Type | AF |
| Width Across Teeth | 1.563 in |
| Weight | 13.71 LB |
| EAN or UPC | 697950083940 |
