Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 48 Number of Teeth
- 5.7 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Type | B |
| Hub Dia. | 3.938 in |
| Pitch Diameter | 5.73 in |
| Bore Range [Min] | 0.5 in |
| Hub Projection | 1/2 in |
| Belt Pitch | 0.375 in |
| No. of Teeth | 48 |
| Bore Range [Max] | 2 in |
| Outside Dia. | 5.7 in |
| Finished Bore | N/A |
| Belt Size | L |
| Material | Cast Iron |
| Bore Type | Bushed |
| Bushing Type | Taper-Lock |
| Type | CF |
| Belt Width | 0.5 in |
| Width Across Teeth | 0.563 in |
| Bushing Series | 2012 |
| Length Through Bore | 1.25 in |
| Weight | 4.88 LB |
| EAN or UPC | 697950083971 |
