Skip to content Skip to navigation menu
5200-C, 5200-SB Light Series Bearing

5215CZZ

5200-C, 5200-SB Light Series Bearing
Item #102127341
  • 75 mm ID x 130 mm OD x 1 5/8" Wide
  • Double Sealed
  • No Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing
5200-C, 5200-SB Light Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 75 mm ID x 130 mm OD x 1 5/8" Wide
  • Double Sealed
  • No Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing

applications

  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Origin Double Row Deep Groove
Dynamic Load Rating 21500 lbf
O.D. Type Straight
Limiting Speed - Oil 4300 rpm
Precision Standard
Contact Angle 30°
Cage Type Metal
Radial Internal Clearance Normal
Capacity Standard Capacity
Material Steel
Limiting Speed - Sealed 3200 rpm
icNumber 7697968
Locking Device No Locking Device
I.D. 75 mm
Ball Material Steel
Bore Type Round Bore
Preload Level None
Radial Internal Clearance Specification Normal Clearance
Precision Level Standard (ABEC 1)
Bearing Type Angular Contact
Inch/Metric Metric Bore
Enclosure Double Sealed
Series 5200C
Flush Ground No
Lubricant Chevron SRI-2
Outer Ring Width 1 5/8 in
Static Load Rating 88 kN
Fillet Radius 1.5 mm
Width 41.275 mm
Static Load Rating [Max] 19800 lbf
Seal Type Contact Seals
No. in Set Single Bearing
Seal Material Rubber
O.D. 130 mm
Inner Ring Width 1 5/8 in
Snap Ring No Snap Ring
Limiting Speed - Grease 3200 rpm
Rows of Balls Double
Temperature Range [Max] 250 °F
Cage Material Steel
Temperature Range [Min] -22 °F
Weight 4.323 LB
EAN or UPC 97741013130
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison