Find a Service Center
Alternate Products
MRC Bearing Service
8310
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #101169056
- Single Row Angular Contact Bearing, 50 mm ID x 110 mm OD x 27 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Precision Level | Standard (ABEC 1) |
| Lubricant | Oil Preservative |
| Bearing Type | Angular Contact |
| Inner Ring Width | 27 mm |
| Static Load Rating | 52 kN |
| Enclosure | Open |
| Radial Internal Clearance Specification | Normal Clearance |
| icNumber | 7699061 |
| Limiting Speed - Grease | 5800 rpm |
| Precision | Standard |
| Contact Angle | 40° |
| Fillet Radius | 2 mm |
| Limiting Speed - Oil | 7500 rpm |
| Static Load Rating [Max] | 11900 lbf |
| Seal Material | None |
| Ball Material | Steel |
| O.D. | 110 mm |
| No. in Set | Duplex Set |
| I.D. | 50 mm |
| Seal Type | Unsealed |
| Capacity | Standard Capacity |
| O.D. Type | Straight |
| Internal Design | Universal Mounting |
| Series | 7300P |
| Locking Device | No Locking Device |
| Rows of Balls | Single |
| Temperature Range [Max] | 450 °F |
| Radial Internal Clearance | Normal |
| Bore Type | Round Bore |
| Flush Ground | Yes |
| Snap Ring | No Snap Ring |
| Preload Level | None |
| Width | 27.000 mm |
| Origin | Single Row Angular Contact |
| Material | Steel |
| Inch/Metric | Metric Bore |
| Dynamic Load Rating | 16700 lbf |
| Cage Type | Metal |
| Outer Ring Width | 27 mm |
| Cage Material | Brass/Bronze |
| Weight | 2.815 LB |
| EAN or UPC | 97741017589 |
