Find a Service Center
Alternate Products
MRC Bearing Service
8320
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #101169062
- Single Row Angular Contact Bearing, 100 mm ID x 215 mm OD x 47 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| O.D. Type | Cylindrical |
| Inch/Metric | Metric |
| No. in Set | Duplex Set |
| Seal Material | None |
| Bearing Type | Unmounted, Angular Contact |
| Radial Internal Clearance Specification | Normal Clearance |
| O.D. | 8.46 in, 215 mm |
| Ball Material | Steel |
| Series | 7300P |
| Lubricant | Oil Preservative |
| Bore Type | Cylindrical |
| Dynamic Load Rating | 190 kN |
| Static Load Rating | 190 kN |
| Internal Design | Universal Mounting |
| Precision | Standard |
| Temperature Range [Max] | 450 °F |
| Contact Angle | 40 Degree |
| Cage Type | Metal |
| Limiting Speed - Oil | 3900 rpm |
| Locking Device | No Locking Device |
| Cage Material | Brass |
| Precision Level | Standard (ABEC 1) |
| Static Load Rating [Max] | 41100 lbf |
| Flush Ground | Yes |
| I.D. | 3.94 in, 100 mm |
| Origin | Single Row Angular Contact |
| Limiting Speed - Grease | 3000 rpm |
| icNumber | 7699069 |
| Capacity | Standard Capacity |
| Enclosure | Open |
| Fillet Radius | 2.5 mm |
| Rows of Balls | Single |
| Inner Ring Width | 1.85 in, 47 mm |
| Seal Type | Unsealed |
| Radial Internal Clearance | Normal |
| Outer Ring Width | 1.85 in, 47 mm |
| Width | 1.85 in, 47 mm |
| Preload Level | Light |
| Snap Ring | No Snap Ring |
| Material | Bearing Steel |
| Weight | 19.026 LB |
| EAN or UPC | 97741018173 |
