Skip to content Skip to navigation menu
7400-PJD Heavy Series Duplex Ball Bearing

7418PJDU

7400-PJD Heavy Series Duplex Ball Bearing
Item #101170768
  • Single Row Angular Contact Bearing, 90 mm ID x 225 mm OD x 54 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
7400-PJD Heavy Series Duplex Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Single Row Angular Contact Bearing, 90 mm ID x 225 mm OD x 54 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle

features

  • MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
  • 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
  • 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
  • ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
  • 7400-PJ and PJD Series bearings are similar to the 7200-PJ and 7300-PH Series but are heavier sectioned and are used for very heavy thrust loads or combined radial and thrust loads where thrust is predominant.
Lubricant Oil Preservative
Rows of Balls Single
Precision Level Standard (ABEC 1)
Origin Single Row Angular Contact
Preload Level None
Enclosure Open
Seal Type Unsealed
Series 7400PJ
Inner Ring Width 54 mm
Static Load Rating [Max] 49500 lbf
Inch/Metric Metric Bore
Fillet Radius 3 mm
Outer Ring Width 54 mm
Contact Angle 40°
Capacity Standard Capacity
Cage Material Brass/Bronze
O.D. Type Straight
Ball Material Steel
Width 54.000 mm
Limiting Speed - Grease 2700 rpm
Material Steel
Temperature Range [Max] 450 °F
Snap Ring No Snap Ring
Internal Design Universal Mounting
icNumber 7695925
I.D. 90 mm
Radial Internal Clearance Normal
Bore Type Round Bore
Static Load Rating 200 kN
Limiting Speed - Oil 3500 rpm
Precision Standard
Flush Ground Yes
Locking Device No Locking Device
Bearing Type Angular Contact
Dynamic Load Rating 51500 lbf
Radial Internal Clearance Specification Normal Clearance
Cage Type Metal
O.D. 225 mm
No. in Set Single Bearing
Seal Material None
Weight 25.673 LB
EAN or UPC 97741018623
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison