6200DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100760831

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

I.D.	10 mm
Capacity	Standard Capacity
Limiting Speed - Grease	18000 rpm
Seal Material	Buna-N
Rows of Balls	Single
Seal Type	Contact Seals
Dynamic Load Rating	1,150.00 lbf
Static Load Rating [Max]	537.00 lbf
Material	Steel
Bearing Type	Radial
Contact Angle	0°
Inner Ring Width	9 mm
Preload Level	None
icNumber	7695881
Snap Ring	No Snap Ring
Radial Internal Clearance	C3
Ball Material	Steel
O.D.	30.0000 mm
Width	9 mm
Precision Level	Standard (ABEC 1)
Cage Material	Pressed Steel
Limiting Speed - Oil	30000 rpm
Enclosure	Double Sealed
Lubricant	Mul-Temp SRL
Precision	Standard
Cage Type	Metal
Radial Internal Clearance Specification	Greater Than Normal Clearance
Corner Radius [Min]	0.60 mm
Inch/Metric	Metric Bore
O.D. Type	Straight
Outer Ring Width	9 mm
Bore Type	Round Bore
Locking Device	No Locking Device
No. in Set	Single Bearing
Weight	0.071 LB
EAN or UPC	29176063831