Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.
applications
Electric motors and generators
Electrical appliances
Pumps and compressors
Blowers and fans
Speed changers
Gearboxes and drives
Woodworking machinery
Lawn and garden equipment
Transmissions
compliances
Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
caution
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing
Material
Steel
Bore Type
Round Bore
Radial Internal Clearance
Normal
O.D. Type
Straight
O.D.
1.25984 in
Rows of Balls
Single
Bearing Type
Radial
Cage Material
Pressed Steel
Preload Level
None
Static Load Rating [Max]
686 lbf
Dynamic Load Rating
1529 lbf
Capacity
Standard Capacity
Outer Ring Width
10 mm
Precision Level
Standard (ABEC 1)
Precision
Standard
Limiting Speed - Grease
22000 rpm
Enclosure
Double Shielded
Inch/Metric
Inch Bore
I.D.
1/2 in
Locking Device
No Locking Device
Snap Ring
No Snap Ring
Contact Angle
0°
Ball Material
Steel
Radial Internal Clearance Specification
Normal Clearance
Seal Type
Non-Contact Seals
Seal Material
Metal
Cage Type
Metal
Corner Radius [Min]
0.6 mm
Limiting Speed - Oil
N/A
Weight
0.073 LB
EAN or UPC
29176013683
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
