6209

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761264

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Capacity	Standard Capacity
Inch/Metric	Metric Bore
Corner Radius [Min]	1.10 mm
Width	19 mm
Static Load Rating [Max]	4,580.00 lbf
Preload Level	None
Outer Ring Width	19 mm
I.D.	45 mm
Cage Type	Metal
Precision	Standard
Ball Material	Steel
Radial Internal Clearance Specification	Normal Clearance
Lubricant	Oil Preservative
Limiting Speed - Oil	9000 rpm
Inner Ring Width	19 mm
O.D.	85.0000 mm
Dynamic Load Rating	7,436.00 lbf
Bearing Type	Radial
Seal Material	None
No. in Set	Single Bearing
Bore Type	Round Bore
Seal Type	Unsealed
Material	Steel
Cage Material	Pressed Steel
Rows of Balls	Single
Limiting Speed - Grease	7500 rpm
Enclosure	Open
Snap Ring	No Snap Ring
icNumber	7699309
Radial Internal Clearance	Normal
O.D. Type	Straight
Contact Angle	0°
Locking Device	No Locking Device
Precision Level	Standard (ABEC 1)
Weight	0.913 LB
EAN or UPC	29176014901