6210

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761322

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

I.D.	50 mm
icNumber	7697554
Static Load Rating [Max]	5,220.00 lbf
Ball Material	Steel
Cage Material	Pressed Steel
Seal Material	None
Precision Level	Standard (ABEC 1)
Precision	Standard
Dynamic Load Rating	8,262.00 lbf
O.D.	90.0000 mm
Width	20 mm
Bore Type	Round Bore
Bearing Type	Radial
Radial Internal Clearance	Normal
Inch/Metric	Metric Bore
Limiting Speed - Oil	8500 rpm
Contact Angle	0°
Preload Level	None
Radial Internal Clearance Specification	Normal Clearance
Corner Radius [Min]	1.10 mm
Seal Type	Unsealed
No. in Set	Single Bearing
Rows of Balls	Single
Cage Type	Metal
Lubricant	Oil Preservative
Material	Steel
Limiting Speed - Grease	7100 rpm
Locking Device	No Locking Device
Inner Ring Width	20 mm
Capacity	Standard Capacity
O.D. Type	Straight
Snap Ring	No Snap Ring
Enclosure	Open
Outer Ring Width	20 mm
Weight	1.021 LB
EAN or UPC	29176015007