6305DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761029

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

No. in Set	Single Bearing
Inch/Metric	Metric Bore
Capacity	Standard Capacity
Static Load Rating [Max]	2,530.00 lbf
Locking Device	No Locking Device
Contact Angle	0°
icNumber	7695911
Bore Type	Round Bore
Enclosure	Double Sealed
Cage Material	Pressed Steel
Limiting Speed - Oil	13000 rpm
Snap Ring	No Snap Ring
Material	Steel
Dynamic Load Rating	4,630.00 lbf
O.D. Type	Straight
Bearing Type	Radial
Radial Internal Clearance Specification	Greater Than Normal Clearance
Limiting Speed - Grease	8000 rpm
Cage Type	Metal
Ball Material	Steel
Width	17 mm
Precision Level	Standard (ABEC 1)
Rows of Balls	Single
Lubricant	Mul-Temp SRL
Outer Ring Width	17 mm
Seal Type	Contact Seals
O.D.	62.0000 mm
Corner Radius [Min]	1.10 mm
Inner Ring Width	17 mm
I.D.	25 mm
Radial Internal Clearance	C3
Precision	Standard
Preload Level	None
Seal Material	Buna-N
Weight	0.511 LB
EAN or UPC	29176065491