6307DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761166

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Bearing Type	Radial
icNumber	7695915
Inch/Metric	Metric Bore
Radial Internal Clearance Specification	Greater Than Normal Clearance
Inner Ring Width	21 mm
O.D. Type	Straight
Contact Angle	0°
Width	21 mm
O.D.	80.0000 mm
Corner Radius [Min]	1.50 mm
Dynamic Load Rating	7,908.00 lbf
Outer Ring Width	21 mm
Radial Internal Clearance	C3
Enclosure	Double Sealed
Lubricant	Mul-Temp SRL
Static Load Rating [Max]	4,320.00 lbf
Rows of Balls	Single
Precision	Standard
Precision Level	Standard (ABEC 1)
No. in Set	Single Bearing
Capacity	Standard Capacity
Preload Level	None
I.D.	35 mm
Bore Type	Round Bore
Limiting Speed - Grease	6000 rpm
Material	Steel
Locking Device	No Locking Device
Cage Type	Metal
Seal Type	Contact Seals
Cage Material	Pressed Steel
Limiting Speed - Oil	10000 rpm
Ball Material	Steel
Seal Material	Buna-N
Snap Ring	No Snap Ring
Weight	1.01 LB
EAN or UPC	29176065637