6313DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761527

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Material	Steel
Radial Internal Clearance Specification	Greater Than Normal Clearance
Bearing Type	Radial
Width	33 mm
Radial Internal Clearance	C3
Lubricant	Mul-Temp SRL
Outer Ring Width	33 mm
Snap Ring	No Snap Ring
Seal Type	Contact Seals
No. in Set	Single Bearing
Locking Device	No Locking Device
Rows of Balls	Single
Limiting Speed - Grease	3400 rpm
Cage Type	Metal
Enclosure	Double Sealed
Cage Material	Pressed Steel
Bore Type	Round Bore
Corner Radius [Min]	2.10 mm
Dynamic Load Rating	21,835.00 lbf
Limiting Speed - Oil	6000 rpm
Ball Material	Steel
icNumber	7696260
Capacity	Standard Capacity
Precision Level	Standard (ABEC 1)
Static Load Rating [Max]	13,450.00 lbf
Seal Material	Buna-N
I.D.	65 mm
Inner Ring Width	33 mm
O.D.	140.0000 mm
Precision	Standard
Preload Level	None
Contact Angle	0°
Inch/Metric	Metric Bore
O.D. Type	Straight
Weight	4.72 LB
EAN or UPC	29176065934