6315DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761595

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Seal Material	Buna-N
O.D. Type	Straight
Precision	Standard
Cage Material	Pressed Steel
O.D.	160.0000 mm
Outer Ring Width	37 mm
Material	Steel
Rows of Balls	Single
Cage Type	Metal
Radial Internal Clearance Specification	Greater Than Normal Clearance
Limiting Speed - Grease	2800 rpm
Lubricant	Mul-Temp SRL
Capacity	Standard Capacity
Dynamic Load Rating	26,674.00 lbf
Locking Device	No Locking Device
Seal Type	Contact Seals
Preload Level	None
Ball Material	Steel
No. in Set	Single Bearing
Snap Ring	No Snap Ring
Contact Angle	0°
Corner Radius [Min]	2.10 mm
Radial Internal Clearance	C3
Inner Ring Width	37 mm
Static Load Rating [Max]	17,400.00 lbf
Bore Type	Round Bore
Limiting Speed - Oil	5000 rpm
Inch/Metric	Metric Bore
icNumber	7696261
Enclosure	Double Sealed
Bearing Type	Radial
I.D.	75 mm
Width	37 mm
Precision Level	Standard (ABEC 1)
Weight	6.838 LB
EAN or UPC	29176066016