Parker's four-way. body ported valves are ideal for controlling larger double-acting cylinders and air motors. Body ported for in-line, direct pipe porting. The same valve can also be used on Parker's IEM (Inlet/Exhaust Manifold), allowing more than one valve to be mounted on a common base. B series valves feature Parker's exclusive Wear Compensation System for millions of nonlubricated cycles. Choose from single- or double-remote pilot control. DIN-style electrical connection.
features
IEM (inlet/exhaust manifold)
Maximum Performance – low friction, fast response, lower operating pressures and less wear
Long Cycle Life – under pressure, radial expansion of the seal occurs to maintain sealing contact with the value bore
NonLube Service – no lubrication required for continuous valve shifting
Bi-Directional Spool Seals – common spool used for any pressure, including vacuum
Cv Flow
2.7
Port Type
NPT
Operating Pressure Range
Vacuum to 145 psi
Valve Duty
Standard Duty
Height
2.060 in
Pilot Source
Internal Pilot Supply - Port 1
Actuator Type
Solenoid
Pilot Exhaust
Vented Pilot Exhaust
Spool Description
N/A
Overrides
Flush - Non-Locking Override
Length
8.410 in
Wiring Options
None
Valve Body Style
Inline
Solenoid
Double
Temperature Range [Max]
120 °F
Voltage Rating
120 VAC
Return Type
Solenoid
Port Size
3/8
Valve Type
4-Way, 2 Position
Series
B6
Engineering Level
A
Stations
N/A
Coil Style
15 mm 3-Pin DIN 43650C
Installed Options
None
Spool Seal Type
Buna-N
Width
1.180 in
Temperature Range [Min]
5 °F
Operation
Electric
Weight
1.5 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
