Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 4" Stroke
- Steel Rails
- Ball Bearing
- No Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Temperature Range [Max] | 165 °F |
| Slide Orientation | Right Hand (Standard) |
| Support Rod Material | Steel |
| Port Location | Standard (Position 1) |
| Bearing Type | Ball Bearing |
| Flow Controls | w/o Flow Controls |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Temperature Range [Min] | 0 °F |
| Proximity Sensor Code | None |
| Stroke | 4 in |
| Slide Type | Thrust Slide |
| Weight per Inch | 0.48 lb |
| Cylinder Type | No Cylinder |
| Proximity Sensor | No Proximity Sensor |
| Slide Configuration Option Code | B4 |
| Cushions - Slide | No Cushions |
| Shock Absorbers - Slide | No Shock Absorber |
| Base Wt. | 8.86 lb |
| Series | HBT |
| Bumpers - Slide | Bumpers w/Adjustable Stop Collar (Both Ends) |
| Support Rod Diameter | 20 mm |
| Positions | 2 Position |
| Pressure [Max] | N/A |
| Cylinder Bore Size | 1.5 in |
| Intermediate Stroke | N/A |
| Cylinder Seal Material | Buna-N |
| Port Size | 1/4 |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Weight | 10.78 LB |
