The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Cushions - Slide
No Cushions
Weight per Inch
0.63 lb
Positions
2 Position
Bumpers - Slide
No Bumpers
Cylinder Seal Material
Buna-N
Temperature Range [Min]
0 °F
Support Rod Diameter
25 mm
Stroke Tolerance
+0.030 in / -0.000 in
Shock Absorbers - Slide
Shock Absorber w/Stroke Adjuster (Both Ends)
Slide Orientation
Right Hand (Standard)
Stroke
8 in
Slide Type
Thrust Slide
Flow Controls
w/o Flow Controls
Intermediate Stroke
N/A
Base Wt.
9.83 lb
Proximity Sensor
Prox Ready, 12 mm
Port Size
1/4
Proximity Sensor Code
J1
Dowel Pin Holes
w/o Dowel Pin Holes
Port Type
NPTF
Port Location
Standard (Position 1)
Bearing Type
Composite Bearing w/Oversized Support Rods
Cylinder Bore Size
1.5 in
Support Rod Material
Steel
Cylinder Type
NFPA Pneumatic Cylinder
Series
HBT
Slide Configuration Option Code
A
Pressure [Max]
150 psi
Temperature Range [Max]
165 °F
Weight
14.87 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
