The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Port Size
3/8
Slide Configuration Option Code
A
Base Wt.
15.67 lb
Support Rod Material
Steel
Cylinder Seal Material
Buna-N
Series
HBT
Dowel Pin Holes
w/o Dowel Pin Holes
Weight per Inch
0.83 lb
Intermediate Stroke
N/A
Cylinder Type
NFPA Pneumatic Cylinder
Slide Type
Thrust Slide
Stroke Tolerance
+0.030 in / -0.000 in
Cushions - Slide
No Cushions
Flow Controls
w/o Flow Controls
Port Location
Standard (Position 1)
Pressure [Max]
150 psi
Slide Orientation
Right Hand (Standard)
Temperature Range [Max]
165 °F
Stroke
15 in
Temperature Range [Min]
0 °F
Bearing Type
Composite Bearing w/Oversized Support Rods
Proximity Sensor
Prox Ready, 12 mm
Proximity Sensor Code
J1
Port Type
NPTF
Positions
2 Position
Bumpers - Slide
No Bumpers
Cylinder Bore Size
2 in
Support Rod Diameter
30 mm
Shock Absorbers - Slide
Shock Absorber w/Stroke Adjuster (Both Ends)
Weight
28.12 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
